Valve with no return ⌀ 25/38mm (pump 925/938)

Outlet with non-return valvefor Plastimo bilgepump 925 and 938

Prevents backflow into the bilges : mounted as close as possible to the strainer, the non-return valve locks up the water in the hose.

• Straight outlet for hose Ø 25 or 38 mm: simply sawing off the Ø 25 outlet

• Polyamide valve + nitrile gasket, fuel resistant.

• Bellows-type gasket allows debris such as seaweed or small cloth. Can be replaced by a flat gasket. converts the valve in a Ø 38 mm fitting (a pre-moulded groove indicates where to cut).