Humminbird Autopilot Kit SC 110

An autopilot should make navigation easier - not harder. That's the thinking behind every feature of the Humminbird Autopilot. In seconds, you set your course or turning pattern and it takes you to your desired destination regardless of boat speed, sea and/or wind conditions. True Course uses GPS position and course keeping algorithms to compensate for current and drift influences. The result is the most stable course possible - automatically. Hold course at the correct sail position through continuous updates of apparent wind and set wind angle. You're in for a nice catch, so let your Humminbird autopilot do the steering. Choose a pre-programmed sailing pattern made specifically for anglers. 

An SC110 Autopilot kit includes an SC110 control unit, course computer with built-in Gyro Rate sensor and fluxgate compass, rudder position feedback unit and wiring.

• Kit includes: Autopilot 3.5" color TFT display, Course Computer with Fluxgate Compass and Rate Gyro, brushless Rudder Feedback Unit and 30m cable. Rotary knob and push button controls.
• All Autopilot products are stand alone - they do not need a Humminbird product to work
• There are many available operation modes which allow you to bow target, choose turn patterns, tack and gybe, or navigate a route from an optional-purchase Humminbird® Multi-Function Display. The Autopilot System requires specific optional-purchase accessories to enable each of the operation modes. Contact our Customer Resource Center for more information.
• We encourage you to read this manual carefully so that you may understand the full capabilities of the SC 110 Autopilot. The manual can be downloaded in the "Resources" section.
• This product should be installed by a certified NMMA or ABYC installer
• Not recommended for boats less than 20 feet in length