Autoterm Thermal insulation ⌀ 24 mm (1m)

Thermal insulation is suitable for the following heaters:

Forced air heaters

Autoterm Air 2D

Autoterm Air 4D

Water heaters

Autoterm Flow 5D / 5B

When installing the exhaust pipe, take into account the high temperature (up to 500°C) of the exhaust pipe when the heater is in operation. Secure the exhaust pipe (Fig. 8) with clamps and install it so that it slopes slightly downward in the direction of the exhaust. Install heat insulation on the exhaust pipe to protect individual sections of your vehicle or boat (wiring or other heat-sensitive objects). The end of the metal pipe should not come into contact with the rubber seal of the heater.

Dimensions: 28 x 28 x 1000 mm