Autoterm Fuel plunger 68.5 cm

The stem is malleable. You must install the diesel plunger carefully so that the rod reaches the bottom of the tank.

Caution: when you have placed the plunger carefully on the tank, you must not force the tightening (when putting the pipe in place and tightening), because the plunger is welded. If you force the tightening with the 807 plunger, you will break the plunger (this is not guaranteed).

The diesel plunger is compatible with the following Autoterm heaters:

• Forced air heaters
• Autoterm Air 2D
• Autoterm Air 4D
• Autoterm Air 8D
• Autoterm Air 9D
• Water heaters
• Autoterm Flow 5D / 5B
• Autoterm Flow 14D

The fuel plunger is provided in forced air heater kits.

Hose length: 68.5 cm

Pipe diameter: 5mm

Bolt thread diameter: 8mm