Autoterm Adapter ⌀ 75-60 mm

If you want to put this adapter on your Ø 75 mm air duct, to reduce it to Ø 60 mm, you must add the Ø 75 mm connector sleeve (DE017) between the heating duct and the adapter (see diagram).

Accessory compatible with:

– Y-shaped adapter for heating duct Ø 75 mm 45°C (DE012)

- Air flow connector sleeve Ø 75 mm (DE017) to connect to a duct

- T-shaped adapter for heating duct Ø 75 mm (DE027)

This adapter is suitable for the following heaters:

• Autoterm Air 4D
• Autoterm Air 9D

Material: PA6 plastic.

Please note: 60 mm outside, but 75 mm inside. It therefore fits in the 60 mm pipe and on a 75 mm T or Y, but to put it in the 75 mm pipe, you need a 75 sleeve.

Do not use this adapter at the air outlet of the heater.

Replaces reference DE031.